Brickwork Supports
Support Systems
Designed to suit site conditions. The range is therefore best specified by using three main variables to calculate your system requirements. Cavity Width, Height of Brickwork and the backing structure Concrete or Steel.
TFS System
One of the most versatile support system available. This system consists of continuous angle with welded support brackets. The support brackets can be standard, inverted, extended and welded at the required centres.
|
Type |
Cavity |
Height of |
Concrete |
|
TFS/50/3.0/C |
50mm |
3000mm |
Concrete |
|
TFS/50/4.5/S |
50mm |
4500mm |
Steel |
|
TFS/75/3.0/S |
75mm |
3000mm |
Steel |
|
TFS/75/5.0/C |
75mm |
5000mm |
Concrete |
|
TFS/100/4.5/C |
100mm |
4500mm |
Concrete |
|
TFS/100/5.0/S |
100mm |
6000mm |
Steel |
|
TFS/100/6.0/S |
100mm |
6000mm |
Steel |
TCA System
A continuous angle support system. This system is mainly used for cavities below 50mm. Angles can be manufactured from 3mm to 15mm thick in 3000mm lengths. Angles would be supplied with pre-punched holes, slots and welded serrated patches all depending on the contract requirements.
TYPICAL SPECIFYING CODES FOR TCA
|
Type |
Cavity |
Height of |
Fixing |
|
TCA/50/3.0/C |
50mm |
3000mm |
Concrete |
|
TCA/75/4.0/S |
75mm |
4000mm |
Steel |
|
TCA/100/5.0/S |
100mm |
5000mm |
Steel |
|
TCA/100/6.0/C |
100mm |
6000mm |
Concrete |
|
TCA/110/7.5/C |
100mm |
7500mm |
Concrete |
